GEKA® plus “XK” quick couplings for drinking water
 |
For professional hose assembly, the good-value alternative to crimping sleeve connections Original GEKA® plus quick couplings “XK” With screwable hose fitting… plus all the outstanding and well-known
GEKA® plus technologies and performance characteristics |
1. Simple installation without an expensive installation tool (a wrench is enough)
2. Can be detached and used at any time
3. Absolutely flawless and firm connection of hose and fitting. Offers protection from accumulations of dirt between hose core and male hose end. No dead space can form, and optimum safety and hygiene standards are achieved
4. No impairment of hose flexibility Hose is supported externally on the sleeve of the hose fitting when bending
5. No risk of injury from sharp edges and corners
6. High pressure loading. Operating pressure (shaped sealing ring) >40 bar (static reference value). The operating pressure of the hose fitting depends to a significant extent on the hose.
7. Vacuum resistance (shaped sealing ring) up to 10 m water column (static reference guide)
The vacuum resistance of the hose fitting depends to a significant extent on the hose
8. For drinking water* KTW-approved to D2. Long-term test results according to DIN DVGW W 270 available (*with high-performance shaped sealing ring 300dK)
9. For almost all high-quality water, industrial and pressure hoses from well-known manufacturers (note hose wall thickness)
10. Simply brilliant and reasonably priced
- CW617N brass, hot-pressed/CW614N (CuZn40Pb2/CuZn39Pb3, DIN 17660 and 50930/6)
- Uniform claw gap of 40 mm, combination possible. Also with GEKA® plus, brass and plastic GEKA®, GEKA® 2000 and GEKA® suction / high-pressure screw couplings
- Lock nubs ensure maximum safety and prevent self/loosening of the coupling halves, also in coupled pressureless state
- Operating pressure (shaped sealing ring) > 40 bar (static reference value)
- Vacuum resistance (shaped sealing ring) up to 10 m water column (static reference value)
 |
|
